Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-754.35.1.el6.x86_64 (mockbuild@x86-02.bsys.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-23) (GCC) ) #1 SMP Sat Nov 7 12:42:14 UTC 2020
Command line: ro root=/dev/mapper/VolGroup-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=VolGroup/lv_root  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007ffdb000 (usable)
 BIOS-e820: 000000007ffdb000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
SMBIOS version 2.8 @ 0xF58C0
SMBIOS 2.8 present.
DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Hypervisor detected: KVM
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7ffdb max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000007ffdb000
 0000000000 - 007fe00000 page 2M
 007fe00000 - 007ffdb000 page 4k
kernel direct mapping tables up to 7ffdb000 @ 8000-c000
RAMDISK: 36e3f000 - 37fef093
ACPI: Deleted _OSI(Windows 2012)
ACPI: Deleted _OSI(Windows 2013)
ACPI: RSDP 00000000000f58a0 00014 (v00 BOCHS )
ACPI: RSDT 000000007ffe2394 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 000000007ffe2240 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 000000007ffe0040 02200 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
ACPI: FACS 000000007ffe0000 00040
ACPI: APIC 000000007ffe22b4 00080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 000000007ffe2334 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
ACPI: WAET 000000007ffe236c 00028 (v01 BOCHS  BXPCWAET 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-000000007ffdb000
Bootmem setup node 0 0000000000000000-000000007ffdb000
  NODE_DATA [000000000000a000 - 000000000003dfff]
  bootmap [000000000003e000 -  000000000004dfff] pages 10
(7 early reservations) ==> bootmem [0000000000 - 007ffdb000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 0002052aa4]    TEXT DATA BSS ==> [0001000000 - 0002052aa4]
  #3 [0036e3f000 - 0037fef093]          RAMDISK ==> [0036e3f000 - 0037fef093]
  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #5 [0002053000 - 00020530f9]              BRK ==> [0002053000 - 00020530f9]
  #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
found SMP MP-table at [ffff8800000f5a80] f5a80
Found 129MB of memory at 48MB for crashkernel auto 
Reserving 129MB of memory at 48MB for crashkernel (System RAM: 2047MB)
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:1c3db81, boot clock
 [ffffea0000000000-ffffea00009fffff] PMD -> [ffff880002600000-ffff880002ffffff] on node 0
 [ffffea0000a00000-ffffea0001bfffff] PMD -> [ffff88000b200000-ffff88000c3fffff] on node 0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000001 -> 0x0000009f
    0: 0x00000100 -> 0x0007ffdb
On node 0 totalpages: 524153
  DMA zone: 56 pages used for memmap
  DMA zone: 101 pages reserved
  DMA zone: 3841 pages, LIFO batch:0
  DMA32 zone: 7112 pages used for memmap
  DMA32 zone: 513043 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x608
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7effc000)
Booting paravirtualized kernel on KVM
NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff880002200000 s104088 r8192 d22888 u1048576
pcpu-alloc: s104088 r8192 d22888 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
kvm-clock: cpu 0, msr 0:2218b81, primary cpu clock
kvm-stealtime: cpu 0, msr 2212d00
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516884
Policy zone: DMA32
Kernel command line: ro root=/dev/mapper/VolGroup-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 crashkernel=129M@48M rd_LVM_LV=VolGroup/lv_root  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Memory: 1900240k/2097004k available (5548k kernel code, 392k absent, 196372k reserved, 6882k data, 1352k init)
Kernel/User page tables isolation: enabled
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:424
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Detected 2500.002 MHz processor.
Calibrating delay loop (skipped) preset value.. 5000.00 BogoMIPS (lpj=2500002)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
mce: CPU supports 10 MCE banks
Speculative Store Bypass: Vulnerable
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
FEATURE SPEC_CTRL Not Present
FEATURE IBPB_SUPPORT Not Present
Spectre V1 : Mitigation: Load fences, usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full retpoline
alternatives: switching to unfair spinlock
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22106 entries in 87 pages
Enabling x2apic
Enabled x2apic
APIC routing finalized to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel Common KVM processor stepping 01
Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
NMI watchdog disabled (cpu0): hardware events not enabled
Booting Node   0, Processors  #1 Ok.
kvm-clock: cpu 1, msr 0:2318b81, secondary cpu clock
kvm-stealtime: cpu 1, msr 2312d00
Brought up 2 CPUs
Total of 2 processors activated (10000.00 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2672 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff]
pci_root PNP0A03:00: host bridge window [mem 0x100000000-0x17fffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff]
pci 0000:00:01.1: reg 20: [io  0xe120-0xe12f]
pci 0000:00:01.2: reg 20: [io  0xe100-0xe11f]
pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
pci 0000:00:02.0: reg 10: [mem 0xfd000000-0xfdffffff pref]
pci 0000:00:02.0: reg 18: [mem 0xfea70000-0xfea70fff]
pci 0000:00:02.0: reg 30: [mem 0xfea60000-0xfea6ffff pref]
pci 0000:00:03.0: reg 10: [io  0xe080-0xe0bf]
pci 0000:00:03.0: reg 20: [mem 0xfe400000-0xfe403fff 64bit pref]
pci 0000:00:0a.0: reg 10: [io  0xe000-0xe07f]
pci 0000:00:0a.0: reg 14: [mem 0xfea71000-0xfea71fff]
pci 0000:00:0a.0: reg 20: [mem 0xfe404000-0xfe407fff 64bit pref]
pci 0000:00:12.0: reg 10: [mem 0xfea40000-0xfea5ffff]
pci 0000:00:12.0: reg 14: [io  0xe0c0-0xe0ff]
pci 0000:00:12.0: reg 30: [mem 0xfea00000-0xfea3ffff pref]
pci 0000:00:1e.0: reg 10: [mem 0xfea72000-0xfea720ff 64bit]
pci 0000:00:1f.0: reg 10: [mem 0xfea73000-0xfea730ff 64bit]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xfe800000-0xfe9fffff]
pci 0000:00:1e.0:   bridge window [mem 0xfe200000-0xfe3fffff 64bit pref]
pci 0000:00:1f.0: PCI bridge to [bus 02-02]
pci 0000:00:1f.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1f.0:   bridge window [mem 0xfe600000-0xfe7fffff]
pci 0000:00:1f.0:   bridge window [mem 0xfe000000-0xfe1fffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 128 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
Switching to clocksource kvm-clock
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io  0x0060]
pnp 00:01: [io  0x0064]
pnp 00:01: [irq 1]
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: [irq 12]
pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:03: [io  0x03f2-0x03f5]
pnp 00:03: [io  0x03f7]
pnp 00:03: [irq 6]
pnp 00:03: [dma 2]
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:04: [io  0x0070-0x0077]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io  0xaf00-0xaf0b]
pnp 00:05: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:06: [io  0xafe0-0xafe3]
pnp 00:06: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:07: [io  0xae00-0xae13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:08: [mem 0xfed00000-0xfed003ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xfe800000-0xfe9fffff]
pci 0000:00:1e.0:   bridge window [mem 0xfe200000-0xfe3fffff 64bit pref]
pci 0000:00:1f.0: PCI bridge to [bus 02-02]
pci 0000:00:1f.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1f.0:   bridge window [mem 0xfe600000-0xfe7fffff]
pci 0000:00:1f.0:   bridge window [mem 0xfe000000-0xfe1fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
pci 0000:00:1e.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, high) -> IRQ 10
pci 0000:00:1e.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
pci 0000:00:1f.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
pci 0000:00:1f.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff]
pci_bus 0000:01: resource 2 [mem 0xfe200000-0xfe3fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe7fffff]
pci_bus 0000:02: resource 2 [mem 0xfe000000-0xfe1fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
pci 0000:00:01.2: PCI INT D disabled
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18112k freed
sha256_ssse3: Neither AVX nor SSSE3 is available/usable.
futex hash table entries: 512 (order: 3, 32768 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1707353093.433:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3746
SELinux:  Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key B902A2D1C7BD71C2
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [0] registered
acpiphp: Slot [1] registered
acpiphp: Slot [2] registered
acpiphp: Slot [3-1] registered
acpiphp: Slot [4-1] registered
acpiphp: Slot [5-1] registered
acpiphp: Slot [6-1] registered
acpiphp: Slot [7-1] registered
acpiphp: Slot [8-1] registered
acpiphp: Slot [9-1] registered
acpiphp: Slot [10-1] registered
acpiphp: Slot [11-1] registered
acpiphp: Slot [12-1] registered
acpiphp: Slot [13-1] registered
acpiphp: Slot [14-1] registered
acpiphp: Slot [15-1] registered
acpiphp: Slot [16-1] registered
acpiphp: Slot [17-1] registered
acpiphp: Slot [18-1] registered
acpiphp: Slot [19-1] registered
acpiphp: Slot [20-1] registered
acpiphp: Slot [21-1] registered
acpiphp: Slot [22-1] registered
acpiphp: Slot [23-1] registered
acpiphp: Slot [24-1] registered
acpiphp: Slot [25-1] registered
acpiphp: Slot [26-1] registered
acpiphp: Slot [27-1] registered
acpiphp: Slot [28-1] registered
acpiphp: Slot [29-1] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
acpiphp: Slot [0-1] registered
acpiphp: Slot [1-1] registered
acpiphp: Slot [2-1] registered
acpiphp: Slot [3-2] registered
acpiphp: Slot [4-2] registered
acpiphp: Slot [5-2] registered
acpiphp: Slot [6-2] registered
acpiphp: Slot [7-2] registered
acpiphp: Slot [8-2] registered
acpiphp: Slot [9-2] registered
acpiphp: Slot [10-2] registered
acpiphp: Slot [11-2] registered
acpiphp: Slot [12-2] registered
acpiphp: Slot [13-2] registered
acpiphp: Slot [14-2] registered
acpiphp: Slot [15-2] registered
acpiphp: Slot [16-2] registered
acpiphp: Slot [17-2] registered
acpiphp: Slot [18-2] registered
acpiphp: Slot [19-2] registered
acpiphp: Slot [20-2] registered
acpiphp: Slot [21-2] registered
acpiphp: Slot [22-2] registered
acpiphp: Slot [23-2] registered
acpiphp: Slot [24-2] registered
acpiphp: Slot [25-2] registered
acpiphp: Slot [26-2] registered
acpiphp: Slot [27-2] registered
acpiphp: Slot [28-2] registered
acpiphp: Slot [29-2] registered
acpiphp: Slot [30-1] registered
acpiphp: Slot [31-1] registered
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
uhci_hcd 0000:00:01.2: setting latency timer to 64
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000e100
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-754.35.1.el6.x86_64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2024-02-08 07:44:53 UTC (1707378293)
Initalizing network drop monitor service
Freeing unused kernel memory: 1352k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 576k freed
Freeing unused kernel memory: 1520k freed
dracut: dracut-004-411.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
usb 1-1: new full speed USB device number 2 using uhci_hcd
dracut: rd_NO_MD: removing MD RAID activation
virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
virtio-pci 0000:00:03.0: setting latency timer to 64
virtio-pci 0000:00:0a.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, high) -> IRQ 10
virtio-pci 0000:00:0a.0: setting latency timer to 64
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xe120 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xe128 irq 15
usb 1-1: New USB device found, idVendor=0627, idProduct=0001
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
usb 1-1: Product: QEMU USB Tablet
usb 1-1: Manufacturer: QEMU
usb 1-1: SerialNumber: 28754-0000:00:01.2-1
usb 1-1: configuration #1 chosen from 1 choice
input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input3
generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
  alloc irq_desc for 24 on node -1
  alloc kstat_irqs on node -1
virtio-pci 0000:00:0a.0: irq 24 for MSI/MSI-X
  alloc irq_desc for 25 on node -1
  alloc kstat_irqs on node -1
virtio-pci 0000:00:0a.0: irq 25 for MSI/MSI-X
 vda: vda1 vda2 vda3 vda4
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
dracut: Scanning devices vda2 vda3 vda4  for LVM logical volumes VolGroup/lv_swap VolGroup/lv_root 
dracut: inactive '/dev/VolGroup/lv_root' [48.53 GiB] inherit
dracut: inactive '/dev/VolGroup/lv_swap' [992.00 MiB] inherit
Refined TSC clocksource calibration: 2499.891 MHz.
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery
EXT4-fs (dm-0): orphan cleanup on readonly fs
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 397149
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 397116
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 393873
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 393867
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 392904
EXT4-fs (dm-0): 5 orphan inodes deleted
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: 
dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1707378294.677:2): selinux=0 auid=4294967295 ses=4294967295
dracut: 
dracut: Switching root
udev: starting version 147
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:00:12.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, high) -> IRQ 10
e1000 0000:00:12.0: setting latency timer to 64
e1000 0000:00:12.0: eth0: (PCI:33MHz:32-bit) 4e:ac:1a:2a:c4:bc
e1000 0000:00:12.0: eth0: Intel(R) PRO/1000 Network Connection
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: 
Adding 1015804k swap on /dev/mapper/VolGroup-lv_swap.  Priority:-1 extents:1 across:1015804k